com.adventnet.snmp.beans
Class SnmpTarget

java.lang.Object
  |
  +--com.adventnet.snmp.beans.SnmpServer
        |
        +--com.adventnet.snmp.beans.SnmpTarget

All Implemented Interfaces:

CustomizerTemplate, java.util.EventListener, java.io.Serializable, java.beans.VetoableChangeListener

Direct Known Subclasses:

SnmpPoller, SnmpTable

public class SnmpTarget

extends SnmpServer

implements java.beans.VetoableChangeListener, CustomizerTemplate

This class is a lightweight SNMP session for use with other beans in applications and applets. It sends synchronous SNMP requests. It contains an array of OIDs specifying variables used in SNMP operations, and list of values for set and trap operations. MIB support and other SNMP functions are built into this class. The SnmpTarget bean is used for many of the common operations that we do with a SNMP agent such as get, getnext, set and trap operations. MIB support and other SNMP functions are built into this class. This bean can be used to make a single variable request, multiple variable requests, walking a table and a number of operations, including loading MIBs to support SNMP operations, getting all instances of a variable type, etc

To use in an application, simply instantiate, specify the object IDs, and perform operations. For example,

    SnmpTarget target = new SnmpTarget();
    target.setTargetHost("localhost");  // set host, or other parameters
    target.setObjectID(".1.3.6.1.2.1.1.1.0"); // or 1.1.0 with standard prefix
    String result = target.snmpGet();
    

    if (result == null) 
        System.err.println("Failed: "+target.getErrorString());
    else System.out.println("Response: "+result);
    
  

To use in an applet use an alternate constructor, but the procedure is the same. For example,

    SnmpTarget target = new SnmpTarget(appletInstance);
    target.setTargetHost("localhost");  // set host, or other parameters
    target.setObjectID(".1.3.6.1.2.1.1.1.0");  // or 1.1.0 with standard prefix
    String result = target.snmpGet();
    

    if (result == null) 
        System.err.println("Failed: "+target.getErrorString());
    else System.out.println("Response: "+result);
    
  

This class supports multiple variable requests, and a number of operations, including loading MIBs to support SNMP operations, getting all instances of a variable type, etc..

For multiple variable requests, set the OID list using the setObjectIDList(String[]) or setSnmpOIDList(SnmpOID[]) methods. Your SNMP operations with this SnmpTarget will use this list.

We can also register for events from the SnmpTarget component, so that we can notify another object whenever a response is received for any request. This may be useful for example in applying the result of a query to multiple objects. However, in most cases, the synchronous use of this component will not use events and event registration. The listeners that are registered for receiving responses from the agent should register, using setSendTimeoutEvents(true) to get the timeout events, which otherwise, will not be passed to the listener. This class can be used directly, and it will also be used by beans, e.g. SnmpPoller bean, which provides SNMP services. For garbage collection of the resources used, releaseResources() method should be invoked. Different SnmpTarget instances on the same JVM, will reuse the SnmpAPI, SnmpSession and MibOperations instance. So, for releasing these resources, releaseResources() method should be called on every SnmpTarget instance created and when this method is called on the final instance of SnmpTarget, these will be garbage collected.

See Also:

Serialized Form

Field Summary

boolean	serialize based on this flag v3 table like USMUserTable and SnmpEngineTable will be serialized
static byte	SNMPGET Constant for SNMP get request.
static byte	SNMPGETBULK Constant for SNMP V2 Get Bulk request.
static byte	SNMPGETNEXT Constant for SNMP get next request.
static byte	SNMPINFORM Constant for SNMP V2 INFORM request.
static byte	SNMPREPORT Constant for SNMP V2 Report request.
static byte	SNMPRESPONSE Constant for SNMP response request
static byte	SNMPSET Constant for SNMP set request.
static byte	SNMPTRAP Constant for SNMP trap request.
static byte	SNMPV2TRAP Constant for SNMP V2 Trap request.
static int	VERSION1 Constant for SNMP Version 1.
static int	VERSION2C Constant for SNMP Version 2C.
static int	VERSION3 Constant for SNMP Version 3.

Fields inherited from class com.adventnet.snmp.beans.SnmpServer

AUTH_NO_PRIV, AUTH_PRIV, CBC_3DES, CBC_DES, CFB_AES_128, CFB_AES_192, CFB_AES_256, MD5_AUTH, NO_AUTH, NO_AUTH_NO_PRIV, NO_PRIV, oidList, SHA_AUTH

Constructor Summary

SnmpTarget()
This constructor is used in applications.

SnmpTarget(java.applet.Applet applet)
Use this constructor for applets.

SnmpTarget(java.applet.Applet applet, int port, java.lang.String session)
Use this constructor for creating a new session for this applet.

SnmpTarget(int protocol, ProtocolOptions options)
This constructor is used for applications which use protocol other than UDP/IP.

SnmpTarget(int port, java.lang.String session)
This constructor is used for creating a new session for this application.

SnmpTarget(SnmpSession ses, MibOperations mib)
This constructor is used to create an SnmpTarget instance with a specified SnmpSession and MibOperations.

SnmpTarget(java.lang.String[] localAddrs, java.lang.String sessionName)
Use this constructor for applications in which the session needs to be bound to some local address.

Method Summary

void	addLogClient(LoggerProperties loggerProps) Adds the Log client for which the target has to redirect the log messages.
void	addLogClient(LogInterface client) Add the Log client for which the target has to redirect the log messages
int	addObjectID(java.lang.String s) This method adds an SnmpOID specified by string to the SnmpOID list.
void	addResultListener(ResultListener l) Adds a listener for events from this target.
int	addSnmpOID(SnmpOID oid) This method adds an SnmpOID to the previously set list of SnmpOID
void	addSnmpPropertyListener(SnmpPropertyListener l) Adds SnmpPropertyListener to the SnmpPropertyListener list.
void	addUserError(int errorCode, java.lang.String errorString) This method is used to add user defined error codes and the corresponding error string.
void	addV3HandShakeResultListener(V3HandShakeResultListener l) Adds a listener to receive the events when SnmpEngineID discovery and time Synchronization is performed by the method async_create_v3_tables.
void	enableDebugForPDU(boolean setonpdu) The debug can be set on the PDU instance itself using this method.
protected void	genEvent(SnmpPDU pdu) Generates the events to the listeners
protected void	genTimeoutEvent(SnmpPDU pdu) Generates the events to the listeners
boolean	getAttemptComplete() Returns if the splitting pdu is enabled to get the complete data by splitting the varbinds into multiple request.
boolean	getAttemptPartial() Returns the boolean state of whether this target will try to get partial data from an agent if the request is a multiple variable request.
java.lang.String	getAuthPassword() Gets the SNMP V3 AuthPassword
int	getAuthProtocol() Gets the SNMP V3 AuthProtocol
java.lang.String	getCommunity() Gets the SNMP target Community
SnmpResultObject	getCompleteResponse() Gets the complete data from the agent by splitting the varbinds into multiple requests.This can set if request pdu is very big.
java.lang.String	getContextID() Gets the SNMP V3 contextID.
java.lang.String	getContextName() get the SNMP V3 Context name
boolean	getDebug() This method returns true if debug mode is enabled and false otherwise
byte[]	getEngineID() Get the Snmp V3 EngineID
int	getErrorCode() Gets the error code for the last request.
java.util.Hashtable	getErrorCodes() To get the list of all the Error specific for an Snmp Request.
int	getErrorIndex() To get the error index corresponding to the errored oid in the pdu.
java.lang.String	getErrorString() Gets the error string for the request sent.
int	getExceptionCode() Gets the exception code for the last request.
java.util.Hashtable	getExceptionCodes() To get the list of all the Exceptions specific to SnmpV2/V3.
boolean	getIgnoreSpecificControlCodes() Gets the value determining whether the new-line characters, tabs and carriage returns are printed or their hex values.
int	getMaxNumRows() Gets the maximum number of rows that can be processed, default value is 1000.
int	getMaxRepetitions() Gets the SNMP target max repetitions value for a getbulk request.
java.lang.String	getMibModules() This method returns all the MIBs that are loaded in this applet/application.
MibOperations	getMibOperations() get the MibOperations object reference.
int	getNonRepeaters() Gets the SNMP target non-repeaters value for a getbulk request Default is 0.
java.lang.String	getObjectID() This method returns the first object ID as a string
java.lang.String	getObjectID(int index) This method returns the object ID at index as a string
java.lang.String[]	getObjectIDList() This method returns the list of object IDs as a string array or null, if no OIDs is set previously.
int	getPduErrorIndex() To get the error index set in the PDU.
java.lang.String	getPrincipal() Gets the SNMP V3 Principal
java.lang.String	getPrivPassword() Gets the SNMP V3 PrivPassword
int	getPrivProtocol() Gets the SNMP V3 privProtocol.
int	getRetries() Gets the SNMP target retries value.
java.lang.String	getSecurityLevel() Gets the SNMP V3 SecurityLevel
int	getSecurityModel() Gets the SNMP V3 securityModel
boolean	getSendTimeoutEvents() Returns the boolean state of whether this target will send timeout events to a registered listener.
SnmpOID	getSnmpOID() This method returns the first SnmpOID from the list of object IDs or null, if no OID is set previously.
SnmpOID[]	getSnmpOIDList() This method returns the list of object IDs as an array of SnmpOID or null if no OID is set previously.
int	getSnmpVersion() Gets the SNMP target SNMP Version.
java.lang.String	getTargetHost() Gets the SNMP target hostname
int	getTargetPort() get the SNMP target port number
int	getTimeout() Gets the SNMP target timeout value
int	getUserErrorCode() Gets the user defined error code for the last request.
java.lang.String	getUserErrorString() This method is used to get the user defined error string to a specific error code.
int	getVarBindCount() Returns the number of varbinds used with the splitted pdu.
java.lang.String	getWriteCommunity() Gets the SNMP target write Community to be used for set requests
static boolean	isInSubTree(SnmpOID rootoid, SnmpOID objid) Check if objid has rootoid as an ancestor.
boolean	isSerialize() Returns the status of Serialization of v3 tables ( USMUserTable and SnmpEngineTable )
void	loadMibs(java.lang.String mibs) To load the specified mibs.
void	releaseResources() Though the resources will be cleaned up by the garbage collector, if the application is no more using the SnmpTarget bean instance, this method can be used to immediately release the resources.
void	removeLogClient() Removes the Log client for which the target has been registered to redirect the log Messages.
void	removeResultListener(ResultListener l) Removes a listener for events from this target.
void	removeSnmpPropertyListener(SnmpPropertyListener l) Removes the SnmpPropertyListener from the list maintained by this target.
void	removeV3HandShakeListener(V3HandShakeResultListener l) Removes the listener registered for getting events.
void	setAttemptComplete(boolean flag) Enables the flag to get the complete data from the agent by splitting the varbinds into multiple request.This can set if request pdu is very big.
void	setAttemptPartial(boolean b) Sets the boolean state of whether this target will try to get a partial data from an agent if the request is a multi variable request.
void	setAuthPassword(java.lang.String password) Sets the SNMP V3 AuthPassword
void	setAuthProtocol(int protocol) Sets the SNMP V3 AuthProtocol
void	setClientID(int client) The Debug can be captured by setting this clientID.
void	setCommunity(java.lang.String s) Sets the SNMP target Community
void	setContextID(java.lang.String ctxtID) Sets the SNMP V3 contextID.
void	setContextName(java.lang.String cName) set the SNMP V3 Context name
void	setDebug(boolean debug) This method determines if debug output will be printed
void	setEngineID(byte[] eid) Sets the Snmp V3 EngineID
void	setIgnoreSpecificControlCodes(boolean specConCode) Sets the value determining whether the new-line characters, tabs and carriage returns are printed or their hex values.
void	setMaxNumRows(int maxRows) Sets the maximum number of rows that can be processed, default value is 1000.
void	setMaxRepetitions(int i) Sets the SNMP target max repetitions value for a getbulk request.
void	setMibModules(java.lang.String mibs) This method sets the MIB to be loaded in this applet/application.
void	setNonRepeaters(int i) Sets the SNMP target non-repeaters value for a getbulk request Default is 0.
void	setObjectID(int index, java.lang.String s) This method sets the object ID value at index based on specified string
void	setObjectID(java.lang.String s) This method sets the object ID specified by the String value.
void	setObjectIDList(java.lang.String[] s) This method sets the list of object IDs based on the specified string array.
void	setParams(java.lang.String host, java.lang.String port, java.lang.String community, java.lang.String mib, java.lang.String oid) To set Multiple parameters like TargetHost,Port,Community,MibModule and OID.
void	setParams(java.lang.String host, java.lang.String port, java.lang.String community, java.lang.String mib, java.lang.String[] oidlist) To set Multiple parameters like TargetHost,Port,Community,MibModule and OIDList.
void	setPrincipal(java.lang.String s) Sets the SNMP V3 Principal
void	setPrivPassword(java.lang.String password) Sets the SNMP V3 PrivPassword
void	setPrivProtocol(int privprotocol) Sets the SNMP V3 PrivProtocol
void	setRetries(int i) Sets the SNMP target retries value.
void	setSecurityLevel(byte sLevel) Sets the SNMP V3 SecurityLevel.The value will be 0 ,1 or 3.
void	setSecurityModel(int securityModel) Sets the SNMP V3 SecurityModel
void	setSendTimeoutEvents(boolean b) This should be set to true if the listener should be notified of the timeout events in case if the request timesout.
void	setSnmpOID(SnmpOID oid) This method sets the SnmpOID
void	setSnmpOIDList(SnmpOID[] list) This method sets the list of object IDs as the given array of SnmpOID
void	setSnmpVersion(int i) Sets the SNMP target SNMP Version.
void	setTargetHost(java.lang.String s) This method sets the SNMP target hostname
void	setTargetPort(int i) set the SNMP target port number
void	setTimeout(int i) Sets the SNMP target timeout value
void	setVarBindCount(int count) Set the number of varbinds per request to get the complete data from the agent by splitting the varbinds into multiple request in case if the request pdu is very big.
void	setWriteCommunity(java.lang.String s) Sets the SNMP target write Community to be used for set requests
java.lang.String	snmpGet() Queries the target and returns as a string the SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance.
SnmpVar	snmpGet(SnmpOID oid) Gets the SNMP variable identified by specified Object Identifier.
java.lang.String[][]	snmpGetAllList() Gets all instances of variables in the OID list.
SnmpVarBind[][]	snmpGetAllVariableBindings() Gets all instances of variables in the OID list.
SnmpVar[][]	snmpGetAllVariables() Gets all instances of variables in the OID list.
java.lang.String[][]	snmpGetBulkList() Get bulk on list of variables in the OID list.
SnmpVarBind[][]	snmpGetBulkVariableBindings() Get bulk on list of variables in the OID list.
SnmpVar[][]	snmpGetBulkVariables() Get bulk on list of variables in the OID list.
java.lang.String[]	snmpGetList() Queries the agent and returns the list of SNMP variable bindings from the agent using the Object Identifier list previously set in this SnmpTarget instance.
SnmpVar[]	snmpGetList(SnmpOID[] oids) Gets the list of SNMP variables identified by the Object Identifier list stored in this SnmpTarget instance.
java.lang.String	snmpGetNext() Queries the target and returns as a string the next SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance.
SnmpVar	snmpGetNext(SnmpOID oid) Gets the SNMP variable identified by specified Object Identifier.
java.lang.String[]	snmpGetNextList() Queries the agent and returns the list of SNMP variable bindings from the agent using the Object Identifier list previously set in this SnmpTarget instance.
SnmpVar[]	snmpGetNextList(SnmpOID[] oids) Gets the list of SNMP variables identified by the Object Identifier list stored in this SnmpTarget instance.
SnmpVar	snmpGetNextVariable() Queries the target and returns the SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance.
SnmpVarBind	snmpGetNextVariableBinding() Queries the target and returns the SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance.
SnmpVarBind[]	snmpGetNextVariableBindings() Queries the agent and returns the list of SNMP variable bindings from the agent using the Object Identifier list previously set in this SnmpTarget instance.
SnmpVar[]	snmpGetNextVariables() Queries the agent and returns the list of SNMP variable bindings from the agent using the Object Identifier list previously set in this SnmpTarget instance.
SnmpVar	snmpGetVariable() Queries the target and returns the SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance.
SnmpVarBind	snmpGetVariableBinding() Queries the target and returns the SNMP variable binding identified by the first Object Identifier stored in this SnmpTarget instance.
SnmpVarBind[]	snmpGetVariableBindings() Queries the agent and returns the list of SNMP variable bindings from the agent using the Object Identifier list previously set in this SnmpTarget instance.
SnmpVar[]	snmpGetVariables() Queries the agent and returns the list of SNMP variables from the agent using the Object Identifier list previously set in this SnmpTarget instance.
void	snmpSendInformAcknowledgement(long uptime, SnmpOID oid, SnmpVar[] values, int reqID) This method is to send the inform acknowledgement PDU to the inform request sender if the setAutoInformResponse is set as false.
SnmpVarBind[]	snmpSendInformRequest(long uptime, SnmpOID trapOid, SnmpVar[] values) This method is used to send an SNMPV2 inform pdu with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified.
java.lang.String[]	snmpSendInformRequest(long uptime, java.lang.String trapOid, java.lang.String[] values) This method is to send an SNMPV2 inform pdu with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified.
void	snmpSendNotification(long uptime, SnmpOID trapOid, SnmpVar[] values) This method is used to send an SNMPV2 notification pdu with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified.
void	snmpSendNotification(long uptime, java.lang.String trapOid, java.lang.String[] values) This method is used to send an SNMPV2 notification pdu with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified.
void	snmpSendTrap(SnmpOID enterprise, java.lang.String agenthost, int genericType, int specificType, long uptime, SnmpVar[] values) This method is used to send an SNMP trap, with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified.
void	snmpSendTrap(java.lang.String enterprise, java.lang.String agenthost, int genericType, int specificType, long uptime, java.lang.String[] values) This method is used to send an SNMP trap, with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified.
java.lang.String	snmpSet(java.lang.String value) This method is used to do an SNMP set to the target using value specified of the first variable on the variable list.
java.lang.String	snmpSet(java.lang.String value, byte type) This method is used to do an SNMP set to the target of the first variable on the variable list using value specified.
java.lang.String[]	snmpSetList(java.lang.String[] values) This method sets the list of SNMP variable bindings on the agent using the Object Identifier list previously set in this SnmpTarget instance.
SnmpVar	snmpSetVariable(SnmpVar var) This method is used to do an SNMP set with specified value to the target and returns the SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance.
SnmpVarBind[]	snmpSetVariableList(SnmpVar[] values) This method is used to do an SNMP set, with values specified, the list of SNMP variable bindings on the agent, using the Object Identifier list previously set in this SnmpTarget instance.
SnmpVar[]	snmpSetVariables(SnmpVar[] values) This method is used to do an SNMP set, with values specified, the list of SNMP variable bindings on the agent, using the Object Identifier list previously set in this SnmpTarget instance.
void	vetoableChange(java.beans.PropertyChangeEvent e) This method is called when a vetoableChange event is fired from the propertySetting bean.

Methods inherited from class com.adventnet.snmp.beans.SnmpServer

async_create_v3_tables, create_v3_tables, finalize, genEvent, getCharacterEncoding, getHostAddress, getLocalAddresses, getMibPath, getOverwriteCMI, getPacketBufferSize, getSecLevelForTimeSync, getSecurityProvider, getSecurityTable, getSerializedMibFileName, getSimpleDateFormat, getSnmpEngineID, getSnmpEngineTable, getTimeoutInMilliSec, getTimeToWait, getUSMTable, getV3ConfigTable, getV3MsgMaxSize, initJdbcParams, initSecurityProvider, isBroadcastFeatureEnable, isLoadFromCompiledMibs, isLoadFromSerializedMibs, isLoadMibsFromDatabase, isOverwriteCMI, isOverwriteMibsInDatabase, isReadDesc, isSendPDUByGroup, isSerializeMibs, isSetAutoInformResponse, isSupportedSecurityModel, isV3DatabaseFlag, isValidateUser, manage_v3_tables, managing_v3_tables, reestablish, restoreDefaultTimeoutPolicy, setAutoInformResponse, setBroadcastFeatureEnable, setCharacterEncoding, setErrorFlagEnable, setLoadFromCompiledMibs, setLoadFromSerializedMibs, setLoadMibsFromDatabase, setMibOperations, setMibPath, setOverwriteCMI, setOverwriteMibsInDatabase, setPacketBufferSize, setReadDesc, setReceiveBufferSize, setSecLevelForTimeSync, setSendPDUByGroup, setSerializedMibFileName, setSerializeMibs, setSimpleDateFormat, setSnmpEngineBoots, setSnmpEngineID, setTimeoutInMilliSec, setTimeoutPolicy, setTimeToWait, setV3ConfigTable, setV3DatabaseFlag, setV3MsgMaxSize, setWaitTimeToRetry, validateUser

Methods inherited from class java.lang.Object

clone, equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface com.adventnet.snmp.beans.CustomizerTemplate

create_v3_tables, getSnmpEngineTable, getUSMTable, initSecurityProvider, isSupportedSecurityModel, manage_v3_tables

Field Detail

SNMPGET

public static final byte SNMPGET

Constant for SNMP get request.

See Also:

Constant Field Values

SNMPGETNEXT

public static final byte SNMPGETNEXT

Constant for SNMP get next request.

See Also:

Constant Field Values

SNMPRESPONSE

public static final byte SNMPRESPONSE

Constant for SNMP response request

See Also:

Constant Field Values

SNMPSET

public static final byte SNMPSET

Constant for SNMP set request.

See Also:

Constant Field Values

SNMPTRAP

public static final byte SNMPTRAP

Constant for SNMP trap request.

See Also:

Constant Field Values

SNMPGETBULK

public static final byte SNMPGETBULK

Constant for SNMP V2 Get Bulk request.

See Also:

Constant Field Values

SNMPINFORM

public static final byte SNMPINFORM

Constant for SNMP V2 INFORM request.

See Also:

Constant Field Values

SNMPV2TRAP

public static final byte SNMPV2TRAP

Constant for SNMP V2 Trap request.

See Also:

Constant Field Values

SNMPREPORT

public static final byte SNMPREPORT

Constant for SNMP V2 Report request.

See Also:

Constant Field Values

VERSION1

public static final int VERSION1

Constant for SNMP Version 1.

See Also:

Constant Field Values

VERSION2C

public static final int VERSION2C

Constant for SNMP Version 2C.

See Also:

Constant Field Values

VERSION3

public static final int VERSION3

Constant for SNMP Version 3.

See Also:

Constant Field Values

serialize

public boolean serialize

based on this flag v3 table like USMUserTable and SnmpEngineTable will be serialized

Constructor Detail

SnmpTarget

public SnmpTarget(SnmpSession ses,
                  MibOperations mib)

This constructor is used to create an SnmpTarget instance with a specified SnmpSession and MibOperations. Using this constructor the user can decide which SnmpSession and MibOperations instance should be used by SnmpTarget.

Parameters:

ses - Instance of SnmpSession but not null and also the created SnmpSession should be opened before using in this constructor.

mib - Instance of MibOperations

Since:

AdventNet SNMP API 4 SP2 ( Release 4.0.2 )

SnmpTarget

public SnmpTarget()

This constructor is used in applications.

SnmpTarget

public SnmpTarget(int protocol,
                  ProtocolOptions options)

This constructor is used for applications which use protocol other than UDP/IP.

SnmpTarget

public SnmpTarget(int port,
                  java.lang.String session)

This constructor is used for creating a new session for this application. If the session name is same the targets will share the same session. If the port is 0 it will use the available free port.

SnmpTarget

public SnmpTarget(java.applet.Applet applet)

Use this constructor for applets. Applets will try and use SAS, and if unsuccessful, will use local sockets. MIB loading from applets may fail from this SnmpTarget instance if you use this constructor. This matters only for the first SnmpTarget instance, and subsequent instances will use the same SNMP mechanisms.

SnmpTarget

public SnmpTarget(java.applet.Applet applet,
                  int port,
                  java.lang.String session)

Use this constructor for creating a new session for this applet. If the session name is same, the targets will share the same session. If the port is 0 it will use the available free port. Applets will try and use SAS, and if unsuccessful, will use local sockets. MIB loading from applets may fail from this SnmpTarget instance, if you use this constructor. This matters only for the first SnmpTarget instance, and subsequent instances will use the same SNMP mechanisms.

SnmpTarget

public SnmpTarget(java.lang.String[] localAddrs,
                  java.lang.String sessionName)

Use this constructor for applications in which the session needs to be bound to some local address. Usually, the session will be shared across different instances of this class. If seperate session needs to be used, then specify unique sessionNames for the instances created.

Parameters:

localAddrs - The local addresses to which the session needs to be bound.

sessionName - Specify unique sessionNames for the instances which need to use different SnmpSession instances to send data.

Method Detail

loadMibs

public void loadMibs(java.lang.String mibs)
              throws MibException,
                     java.io.IOException,
                     java.io.FileNotFoundException

To load the specified mibs. If first SnmpTarget has been opened with applet parameter, then URLs will be used. MIB loading applies across all the beans in this package, i.e. MIBs can be loaded in any of the bean instances, and will be available across all the beans in this package, across the VM. The files can be seperated by a space, tab, new line, carriage return and pipe symbol.
for example, target.loadMibs("../mibs/RFC1213-MIB ../mibs/IF-MIB");
MIBs can also be loaded from string URLs.

In case of loading the files from space seperated directories, the whole String should be given within the double quotes.
for example, if the MIB file is present in the directory 'Program Files',
target.loadMibs("\"../../mibs/Program Files/RFC1213-MIB\"")

Overrides:

loadMibs in class SnmpServer

Throws:

MibException - is thrown while parser error occurs.

java.io.IOException - is thrown when IO error occurs.

java.io.FileNotFoundException - is thrown if the file is not found.

snmpGet

public java.lang.String snmpGet()

Queries the target and returns as a string the SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT, EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
NOSUCHOBJECTEXP, NOSUCHINSTANCEEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetVariable

public SnmpVar snmpGetVariable()

Queries the target and returns the SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST,UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
NOSUCHOBJECTEXP, NOSUCHINSTANCEEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetVariableBinding

public SnmpVarBind snmpGetVariableBinding()

Queries the target and returns the SNMP variable binding identified by the first Object Identifier stored in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
NOSUCHOBJECTEXP, NOSUCHINSTANCEEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGet

public SnmpVar snmpGet(SnmpOID oid)

Gets the SNMP variable identified by specified Object Identifier. The following errorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT, EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST,UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
NOSUCHOBJECTEXP, NOSUCHINSTANCEEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetList

public java.lang.String[] snmpGetList()

Queries the agent and returns the list of SNMP variable bindings from the agent using the Object Identifier list previously set in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST,UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if snmp version is VERSION2C/VERSION3.
NOSUCHINSTANCEEXP, NOSUCHOBJECTEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetVariables

public SnmpVar[] snmpGetVariables()

Queries the agent and returns the list of SNMP variables from the agent using the Object Identifier list previously set in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST,UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
NOSUCHOBJECTEXP, NOSUCHINSTANCEEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetVariableBindings

public SnmpVarBind[] snmpGetVariableBindings()

Queries the agent and returns the list of SNMP variable bindings from the agent using the Object Identifier list previously set in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST,UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
NOSUCHOBJECTEXP, NOSUCHINSTANCEEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetList

public SnmpVar[] snmpGetList(SnmpOID[] oids)

Gets the list of SNMP variables identified by the Object Identifier list stored in this SnmpTarget instance. Return null if no OIDs specified earlier or in case of errors. Use getErrorString() to get the reason for failure. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
NOSUCHOBJECTEXP, NOSUCHINSTANCEEXP.

Parameters:

oids - - an Array of SnmpOID

Returns:

an Array of SnmpVar if oids is not null, else returns null

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetNext

public java.lang.String snmpGetNext()

Queries the target and returns as a string the next SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetNextVariable

public SnmpVar snmpGetNextVariable()

Queries the target and returns the SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST,UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetNextVariableBinding

public SnmpVarBind snmpGetNextVariableBinding()

Queries the target and returns the SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetNext

public SnmpVar snmpGetNext(SnmpOID oid)

Gets the SNMP variable identified by specified Object Identifier. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetNextList

public java.lang.String[] snmpGetNextList()

Queries the agent and returns the list of SNMP variable bindings from the agent using the Object Identifier list previously set in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST,UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetNextVariables

public SnmpVar[] snmpGetNextVariables()

Queries the agent and returns the list of SNMP variable bindings from the agent using the Object Identifier list previously set in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetNextVariableBindings

public SnmpVarBind[] snmpGetNextVariableBindings()

Queries the agent and returns the list of SNMP variable bindings from the agent using the Object Identifier list previously set in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3
ENDOFMIBVIEWEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetNextList

public SnmpVar[] snmpGetNextList(SnmpOID[] oids)

Gets the list of SNMP variables identified by the Object Identifier list stored in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSet

public java.lang.String snmpSet(java.lang.String value)
                         throws DataException

This method is used to do an SNMP set to the target using value specified of the first variable on the variable list. This method will fail if MIB with this variable is not loaded of this is not a leaf node in the MIB. Throws DataException if no OID is specified earlier or in case of errors. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR,MIB_NODE_UNAVAIL, OID_NOT_LEAF, ERR_CREATING_VARIABLE, SNMP error's defined in ErrorMessages INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID.

Returns:

as a string the value returned by the target.

Throws:

DataException - is thrown if data is invalid

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSet

public java.lang.String snmpSet(java.lang.String value,
                                byte type)
                         throws DataException

This method is used to do an SNMP set to the target of the first variable on the variable list using value specified. Throws DataException if no OID is specified earlier or in case of errors.i The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST,UNKNOWN_ERR, ERR_CREATING_VARIABLE, SNMP error's defined in ErrorMessages INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID.

Returns:

as a string the value that is set.

Throws:

DataException - is thrown if data is invalid

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSetVariable

public SnmpVar snmpSetVariable(SnmpVar var)
                        throws DataException

This method is used to do an SNMP set with specified value to the target and returns the SNMP variable identified by the first Object Identifier stored in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST,UNKNOWN_ERR, SNMP error's defined in ErrorMessages INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID.

Returns:

null, if no OID is specified earlier or in case of errors.

Throws:

DataException - is thrown if data is invalid

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSetVariableList

public SnmpVarBind[] snmpSetVariableList(SnmpVar[] values)
                                  throws DataException

This method is used to do an SNMP set, with values specified, the list of SNMP variable bindings on the agent, using the Object Identifier list previously set in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN,SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR,SNMP error's defined in ErrorMessages INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID.

Returns:

null, if no OID is specified earlier or in case of errors. else returns the VarBinds present in the response

Throws:

DataException - is thrown if data is invalid

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSetList

public java.lang.String[] snmpSetList(java.lang.String[] values)
                               throws DataException

This method sets the list of SNMP variable bindings on the agent using the Object Identifier list previously set in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST,UNKNOWN_ERR, MIB_NODE_UNAVAIL OID_NOT_LEAF ERR_CREATING_VARIABLE ILLEGAL_ARG,SNMP error's defined in ErrorMessages INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID.

Returns:

null, if no OID is specified earlier or in case of errors.

Throws:

DataException - is thrown if data is invalid

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSetVariables

public SnmpVar[] snmpSetVariables(SnmpVar[] values)
                           throws DataException

This method is used to do an SNMP set, with values specified, the list of SNMP variable bindings on the agent, using the Object Identifier list previously set in this SnmpTarget instance. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN,SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR,SNMP error's defined in ErrorMessages INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID.

Returns:

null, if no OID is specified earlier or in case of errors.

Throws:

DataException - is thrown if data is invalid

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSendTrap

public void snmpSendTrap(java.lang.String enterprise,
                         java.lang.String agenthost,
                         int genericType,
                         int specificType,
                         long uptime,
                         java.lang.String[] values)
                  throws DataException

This method is used to send an SNMP trap, with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified. It will send a notification with appropriate changes if version is not v1. The following ErrorCodes can be set.
INVALID_GENERIC_TYPE, INVALID_VERSION, REQ_TIMEDOUT, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, SNMP error's defined in ErrorMessages INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID.

Parameters:

enterprise - This is the OID of the management enterprise that defines the trap message in String format.

agenthost - Contains the source IP address/host name from which the Trap was sent.

genericType - Contains the value based on the type of trap.

specificType - The specific trap type indicates the specific trap as defined in an enterprise-specific MIB.

uptime - The sysUptime value. The uptime value is specified in milliseconds.

values - It contains an array of String values corresponding to the oids in the oidList.

Returns:

null, if no OID is specified earlier or in case of errors.

Throws:

DataException - is thrown if data is invalid

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSendTrap

public void snmpSendTrap(SnmpOID enterprise,
                         java.lang.String agenthost,
                         int genericType,
                         int specificType,
                         long uptime,
                         SnmpVar[] values)
                  throws DataException

This method is used to send an SNMP trap, with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified. It will send a notification with appropriate changes if version is not v1 The following ErrorCodes can be set.
INVALID_GENERIC_TYPE, INVALID_VERSION, REQ_TIMEDOUT,IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, SNMP error's defined in ErrorMessages INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID.

Parameters:

enterprise - This is the OID of the management enterprise that defines the trap message in SnmpOID format.

agenthost - Contains the source IP address/host name from which the Trap was sent.

genericType - Contains the value based on the type of trap.

specificType - The specific trap type indicates the specific trap as defined in an enterprise-specific MIB.

uptime - The sysUptime value. The uptime value is specified in milliseconds.

values - It contains an array of SnmpVar values corresponding to the oids in the oidList.

Returns:

null, if no OID is specified earlier or in case of errors.

Throws:

DataException - is thrown if data is invalid

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSendNotification

public void snmpSendNotification(long uptime,
                                 SnmpOID trapOid,
                                 SnmpVar[] values)
                          throws DataException

This method is used to send an SNMPV2 notification pdu with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified. The following ErrorCodes can be set.
INVALID_VERSION, REQ_TIMEDOUT, IP_ADDR_NOT_SPECIFIED SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST UNKNOWN_ERR, SNMP error's defined in ErrorMessages. INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID. @param uptime The sysUptime value. This is the first oid sent with the notification. The corresponding oid need not be present in the oidList.

Parameters:

values - It contains an array of SnmpVar values corresponding to the oids in the oidList.

trapOid - This should contain the oid corresponding to the snmpTrapOID.

Throws:

DataException - is thrown for invalid values.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSendNotification

public void snmpSendNotification(long uptime,
                                 java.lang.String trapOid,
                                 java.lang.String[] values)
                          throws DataException

This method is used to send an SNMPV2 notification pdu with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified. The following ErrorCodes can be set.
OID_NOT_SPECIFIED INVALID_VERSION, REQ_TIMEDOUT, IP_ADDR_NOT_SPECIFIED SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR , SNMP error's defined in ErrorMessages. INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID. @param uptime The sysUptime value. This is the first oid sent with the notification. The corresponding oid need not be present in the oidList.

Parameters:

values - Contains an array of string values corresponding to the oids in the oidList.

trapOid - This should contain the oid string corresponding to the snmpTrapOID.

Throws:

DataException - is thrown for invalid values.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSendInformRequest

public java.lang.String[] snmpSendInformRequest(long uptime,
                                                java.lang.String trapOid,
                                                java.lang.String[] values)
                                         throws DataException

This method is to send an SNMPV2 inform pdu with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified. The following ErrorCodes can be set.
OID_NOT_SPECIFIED INVALID_VERSION, REQ_TIMEDOUT, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, EMPTY_VAR_BIND, SNMP error's defined in ErrorMessages. INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID. @param uptime The sysUptime value. This is the first oid sent with the notification. The corresponding oid need not be present in the oidList.

Parameters:

values - Contains an array of string values corresponding to the oids in the oidList.

trapOid - This should contain the oid string corresponding to the snmpTrapOID.

Throws:

DataException - is thrown for invalid values.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSendInformAcknowledgement

public void snmpSendInformAcknowledgement(long uptime,
                                          SnmpOID oid,
                                          SnmpVar[] values,
                                          int reqID)
                                   throws DataException

This method is to send the inform acknowledgement PDU to the inform request sender if the setAutoInformResponse is set as false. The PDU is send with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified.

Parameters:

uptime - The sysUptime value. The uptime value is specified in milliseconds.

oid - This should contain the oid corresponding to the snmpTrapOID as SnmpOID object.

values - Contains an array of SnmpVar values corresponding to the oids in the oidList.

reqID - This is the requestID of the Informrequest.

Throws:

DataException - is thrown for invalid values.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpSendInformRequest

public SnmpVarBind[] snmpSendInformRequest(long uptime,
                                           SnmpOID trapOid,
                                           SnmpVar[] values)
                                    throws DataException

This method is used to send an SNMPV2 inform pdu with parameters specified and variable bindings using object ids from the Object Identifier list previously set in this SnmpTarget instance, and the values specified. The following ErrorCodes can be set.
INVALID_VERSION, REQ_TIMEDOUT, IP_ADDR_NOT_SPECIFIED SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST UNKNOWN_ERR EMPTY_VAR_BIND,SNMP error's defined in ErrorMessages. INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID. @param uptime The sysUptime value. This is the first oid sent with the notification. The corresponding oid need not be present in the oidList.

Parameters:

values - Contains an array of SnmpVar values corresponding to the oids in the oidList.

trapOid - This should contain the oid corresponding to the snmpTrapOID.

Throws:

DataException - is thrown for invalid values.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

addObjectID

public int addObjectID(java.lang.String s)

This method adds an SnmpOID specified by string to the SnmpOID list.

Parameters:

s - - the string may be in any format like 1.5.0 or sysName

Returns:

the index of the added entry in the oidList

addSnmpOID

public int addSnmpOID(SnmpOID oid)

This method adds an SnmpOID to the previously set list of SnmpOID

Parameters:

oid - SnmpOID to be added.

Returns:

the index of the added entry in the oidList

getObjectID

public java.lang.String getObjectID(int index)

This method returns the object ID at index as a string

Parameters:

index - index in the oidlist whose value is looked up.

Returns:

an object ID as a string in format like iso.org.dod.internet.. if mibs loaded or as a string in format like .1.3.6.1.. if mibs is not loaded or null if no oid is set previously in that index.

getObjectID

public java.lang.String getObjectID()

This method returns the first object ID as a string

Returns:

the first object ID as a string in format like iso.org.dod.internet.. if mibs loaded or as a string in format like .1.3.6.1.. if mibs is not loaded or null if no oid is set previously.

setObjectID

public void setObjectID(java.lang.String s)

This method sets the object ID specified by the String value.

Parameters:

s - the oid to be set.

setObjectID

public void setObjectID(int index,
                        java.lang.String s)

This method sets the object ID value at index based on specified string

Parameters:

index - index where the oid is to be set in the oidlist

s - oid to be set.

getObjectIDList

public java.lang.String[] getObjectIDList()

This method returns the list of object IDs as a string array or null, if no OIDs is set previously.

Returns:

String[] of oids.

setObjectIDList

public void setObjectIDList(java.lang.String[] s)

This method sets the list of object IDs based on the specified string array.

Parameters:

s - a String array of OIDs.

getSnmpOID

public SnmpOID getSnmpOID()

This method returns the first SnmpOID from the list of object IDs or null, if no OID is set previously.

Returns:

the first SnmpOID.

getDebug

public boolean getDebug()

This method returns true if debug mode is enabled and false otherwise

setDebug

public void setDebug(boolean debug)

This method determines if debug output will be printed

Parameters:

debug - true to get the debug message and false otherwise.

getMibModules

public java.lang.String getMibModules()

This method returns all the MIBs that are loaded in this applet/application.

Returns:

a white-space separated list of mib files.

setMibModules

public void setMibModules(java.lang.String mibs)

This method sets the MIB to be loaded in this applet/application.

Parameters:

mibs - white-space seperated list of mib file to be loaded.

setSnmpOID

public void setSnmpOID(SnmpOID oid)

This method sets the SnmpOID

Parameters:

oid - instance of SnmpOID.

getSnmpOIDList

public SnmpOID[] getSnmpOIDList()

This method returns the list of object IDs as an array of SnmpOID or null if no OID is set previously.

Returns:

an array of SnmpOIDs.

setSnmpOIDList

public void setSnmpOIDList(SnmpOID[] list)

This method sets the list of object IDs as the given array of SnmpOID

Parameters:

list - array of SnmpOIDs.

getTargetHost

public java.lang.String getTargetHost()

Gets the SNMP target hostname

Specified by:

getTargetHost in interface CustomizerTemplate

setTargetHost

public void setTargetHost(java.lang.String s)

This method sets the SNMP target hostname

Specified by:

setTargetHost in interface CustomizerTemplate

getTargetPort

public int getTargetPort()

get the SNMP target port number

Specified by:

getTargetPort in interface CustomizerTemplate

setTargetPort

public void setTargetPort(int i)

set the SNMP target port number

Specified by:

setTargetPort in interface CustomizerTemplate

getContextName

public java.lang.String getContextName()

get the SNMP V3 Context name

setContextName

public void setContextName(java.lang.String cName)

set the SNMP V3 Context name

getContextID

public java.lang.String getContextID()

Gets the SNMP V3 contextID.

Returns:

the contextID set on this target.

setEngineID

public void setEngineID(byte[] eid)

Sets the Snmp V3 EngineID

Parameters:

eid - The eid to be set on this target.

getEngineID

public byte[] getEngineID()

Get the Snmp V3 EngineID

Returns:

the eid set on this target.

setContextID

public void setContextID(java.lang.String ctxtID)

Sets the SNMP V3 contextID. The ContextID is internally stored as an array of bytes. The String <--> byte[] conversion is done using 8859_1 character encoding scheme. If you want to use any other character encoding, then you can set the encoding to be used by using the method setCharacterEncoding in SnmpServer (super class of this).

Parameters:

ctxtID - The contextID to be set on this target.

getPrincipal

public java.lang.String getPrincipal()

Gets the SNMP V3 Principal

setPrincipal

public void setPrincipal(java.lang.String s)

Sets the SNMP V3 Principal

Specified by:

setPrincipal in interface CustomizerTemplate

getSecurityModel

public int getSecurityModel()

Gets the SNMP V3 securityModel

setSecurityModel

public void setSecurityModel(int securityModel)

Sets the SNMP V3 SecurityModel

getAuthProtocol

public int getAuthProtocol()

Gets the SNMP V3 AuthProtocol

setAuthProtocol

public void setAuthProtocol(int protocol)

Sets the SNMP V3 AuthProtocol

Specified by:

setAuthProtocol in interface CustomizerTemplate

getAuthPassword

public java.lang.String getAuthPassword()

Gets the SNMP V3 AuthPassword

setAuthPassword

public void setAuthPassword(java.lang.String password)

Sets the SNMP V3 AuthPassword

Specified by:

setAuthPassword in interface CustomizerTemplate

getPrivPassword

public java.lang.String getPrivPassword()

Gets the SNMP V3 PrivPassword

setPrivPassword

public void setPrivPassword(java.lang.String password)

Sets the SNMP V3 PrivPassword

Specified by:

setPrivPassword in interface CustomizerTemplate

getPrivProtocol

public int getPrivProtocol()

Gets the SNMP V3 privProtocol.

Since:

AdventNet SNMP API 4 SP4 ( Release 4.0.4 )

setPrivProtocol

public void setPrivProtocol(int privprotocol)

Sets the SNMP V3 PrivProtocol

Since:

AdventNet SNMP API 4 SP4 ( Release 4.0.4 )

getCommunity

public java.lang.String getCommunity()

Gets the SNMP target Community

setCommunity

public void setCommunity(java.lang.String s)

Sets the SNMP target Community

getWriteCommunity

public java.lang.String getWriteCommunity()

Gets the SNMP target write Community to be used for set requests

setWriteCommunity

public void setWriteCommunity(java.lang.String s)

Sets the SNMP target write Community to be used for set requests

getIgnoreSpecificControlCodes

public boolean getIgnoreSpecificControlCodes()

Gets the value determining whether the new-line characters, tabs and carriage returns are printed or their hex values.

Overrides:

getIgnoreSpecificControlCodes in class SnmpServer

Returns:

true indicates that they are printed as they are false indicates that their hex value is printed.

setIgnoreSpecificControlCodes

public void setIgnoreSpecificControlCodes(boolean specConCode)

Sets the value determining whether the new-line characters, tabs and carriage returns are printed or their hex values.

Overrides:

setIgnoreSpecificControlCodes in class SnmpServer

Parameters:

specConCode - true implies that they are printed as they are false implies that their hex value is printed.

getTimeout

public int getTimeout()

Gets the SNMP target timeout value

Returns:

timeout value in Seconds. Default is 5Secs.

setTimeout

public void setTimeout(int i)

Sets the SNMP target timeout value

getRetries

public int getRetries()

Gets the SNMP target retries value. Default is 0.

setRetries

public void setRetries(int i)

Sets the SNMP target retries value. Default is 0.

getMaxRepetitions

public int getMaxRepetitions()

Gets the SNMP target max repetitions value for a getbulk request. Default is 50

setMaxRepetitions

public void setMaxRepetitions(int i)

Sets the SNMP target max repetitions value for a getbulk request. Default is 50

getNonRepeaters

public int getNonRepeaters()

Gets the SNMP target non-repeaters value for a getbulk request Default is 0.

setNonRepeaters

public void setNonRepeaters(int i)

Sets the SNMP target non-repeaters value for a getbulk request Default is 0.

getSnmpVersion

public int getSnmpVersion()

Gets the SNMP target SNMP Version. 0 is Version 1 (default) and 1 is Version V2C.

setSnmpVersion

public void setSnmpVersion(int i)

Sets the SNMP target SNMP Version. 0 is Version 1 (default) and 1 is Version V2C.

Specified by:

setSnmpVersion in interface CustomizerTemplate

getErrorString

public java.lang.String getErrorString()

Gets the error string for the request sent. Before sending any request the error string will be "No Error Code Registered". The Error index which is the index of the error in the PDU will be appended to this Error String.

Returns:

the error string that gets set in case of error and "No Error" if there is no error.

getUserErrorCode

public int getUserErrorCode()

Gets the user defined error code for the last request. The user error code returns the pdu error only if the corresponding user error string is set.

Returns:

the pdu error status in case of error and 0 in case of no pdu error or no error string is added.

Since:

AdventNet SNMP API 4 SP2 ( Release 4.0.2 )

getErrorCode

public int getErrorCode()

Gets the error code for the last request. Before sending any request the error code will be -1.

Returns:

the error code in case of error and 0 if there is no error.

getExceptionCodes

public java.util.Hashtable getExceptionCodes()

To get the list of all the Exceptions specific to SnmpV2/V3.

getErrorCodes

public java.util.Hashtable getErrorCodes()

To get the list of all the Error specific for an Snmp Request. Can be used when setAttemptPartial() is set to true.

addUserError

public void addUserError(int errorCode,
                         java.lang.String errorString)

This method is used to add user defined error codes and the corresponding error string. If the specified error code already exists then the method overwrites the previous error string with the one currently provided.

Since:

AdventNet SNMP API 4 SP2 ( Release 4.0.2 )

getUserErrorString

public java.lang.String getUserErrorString()

This method is used to get the user defined error string to a specific error code. If the user has not defined any error string to a specific error code then it will return AdventNet specific error string or standard error. If AdventNet specific error code is not available then it returns null.

Since:

AdventNet SNMP API 4 SP2 ( Release 4.0.2 )

getExceptionCode

public int getExceptionCode()

Gets the exception code for the last request. Before sending any request the exception code will be -1.

Returns:

the exception code in case of exception and 0 if there is no exception.

getErrorIndex

public int getErrorIndex()

To get the error index corresponding to the errored oid in the pdu.

Returns:

the error index in case of error and 0 if there is no error.

getPduErrorIndex

public int getPduErrorIndex()

To get the error index set in the PDU.

Returns:

the error index set in PDU in case of error and 0 if there is no error.

getAttemptPartial

public boolean getAttemptPartial()

Returns the boolean state of whether this target will try to get partial data from an agent if the request is a multiple variable request.

setAttemptPartial

public void setAttemptPartial(boolean b)

Sets the boolean state of whether this target will try to get a partial data from an agent if the request is a multi variable request.

getAttemptComplete

public boolean getAttemptComplete()

Returns if the splitting pdu is enabled to get the complete data by splitting the varbinds into multiple request. By default pdu splitting is disabled.

setAttemptComplete

public void setAttemptComplete(boolean flag)

Enables the flag to get the complete data from the agent by splitting the varbinds into multiple request.This can set if request pdu is very big. The number of varbinds that should to be sent per request can be set using setVarBindCount() method. By default pdu splitting is disabled.

getVarBindCount

public int getVarBindCount()

Returns the number of varbinds used with the splitted pdu. Default value is 0.

setVarBindCount

public void setVarBindCount(int count)

Set the number of varbinds per request to get the complete data from the agent by splitting the varbinds into multiple request in case if the request pdu is very big. Default value is 0.

getSendTimeoutEvents

public boolean getSendTimeoutEvents()

Returns the boolean state of whether this target will send timeout events to a registered listener.

setSendTimeoutEvents

public void setSendTimeoutEvents(boolean b)

This should be set to true if the listener should be notified of the timeout events in case if the request timesout.

addSnmpPropertyListener

public void addSnmpPropertyListener(SnmpPropertyListener l)

Adds SnmpPropertyListener to the SnmpPropertyListener list. Whenever the value of target parameters like targetHostName, targetPort is changed, a event of SnmpPropertyChangeEvent will be thrown to the listeners in this list

See Also:

removeSnmpPropertyListener

public void removeSnmpPropertyListener(SnmpPropertyListener l)

Removes the SnmpPropertyListener from the list maintained by this target.

addResultListener

public void addResultListener(ResultListener l)

Adds a listener for events from this target. The listener listens for events from any or all SNMP requests.

removeResultListener

public void removeResultListener(ResultListener l)

Removes a listener for events from this target.

addV3HandShakeResultListener

public void addV3HandShakeResultListener(V3HandShakeResultListener l)

Adds a listener to receive the events when SnmpEngineID discovery and time Synchronization is performed by the method async_create_v3_tables.

removeV3HandShakeListener

public void removeV3HandShakeListener(V3HandShakeResultListener l)

Removes the listener registered for getting events.

getMibOperations

public MibOperations getMibOperations()

get the MibOperations object reference. This allows using additonal MibOperations functions if needed.

genTimeoutEvent

protected void genTimeoutEvent(SnmpPDU pdu)

Generates the events to the listeners

Overrides:

genTimeoutEvent in class SnmpServer

genEvent

protected void genEvent(SnmpPDU pdu)

Generates the events to the listeners

Overrides:

genEvent in class SnmpServer

snmpGetAllList

public java.lang.String[][] snmpGetAllList()

Gets all instances of variables in the OID list. Used for columnar OIDs, mainly for SNMP Table Column. If the OID list contains more than one table column OIDs then each table column OID will be queried consecutively for each row. The OID list must contain the OIDs of the Table column without instances. setMaxNumRows method sets the maximum number of rows that can be requested for all the table column specified in the OID list. The maximum number of rows that can be processed by default is 1000. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

variables as a two dimensional array of strings Returns null if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetAllVariables

public SnmpVar[][] snmpGetAllVariables()

Gets all instances of variables in the OID list. The maximum number of rows that can be processed by default is 1000. To increase the number of rows to be processed use setMaxNumRows(). The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT, EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN,SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

variables as a two dimensional array of SnmpVar's Useful for small tables. Return null if no OIDs specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetAllVariableBindings

public SnmpVarBind[][] snmpGetAllVariableBindings()

Gets all instances of variables in the OID list. The maximum number of rows that can be processed by default is 1000. To increase the number of rows to be processed use setMaxNumRows(). The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT, EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN,SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_CONTEXT_NAME, INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

variables as a two dimensional array of SnmpVarBind's Useful for small tables. Returns null, if no OID is specified earlier or in case of errors.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetBulkList

public java.lang.String[][] snmpGetBulkList()

Get bulk on list of variables in the OID list. Available in SNMPv2c and SNMPv3 cases.

Please see RFC 1905 if you're not familiar with getbulk. Beyond the first set of non-repeater OIDS, i.e. OIDs that want only a single next value, the data can be viewed as a table, where we're getting rows upto "max repetitions" rows. The returned data is composed of a two-dimensional array where the first "nonRepeaters" columns have only the first data element filled in. The remaining have the rows filled in as expected. Typically, non-repeaters is 0, and we'd be returning a completely filled-in 2-D array of values.

The OID List after this request is set to the last set of OIDs in the returned bulk data, except for the initial non-repeaters for which it is set to the first and only returned OID. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT, EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_NON_REP, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

String-valued variables as a two dimensional array of String's. Returns null if no OIDs specified earlier or in case of errors. Use getErrorString() to get the reason for failure.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetBulkVariables

public SnmpVar[][] snmpGetBulkVariables()

Get bulk on list of variables in the OID list. Available in SNMPv2c and SNMPv3 cases.

Please see RFC 1905 if you're not familiar with getbulk. Beyond the first set of non-repeater OIDS, i.e. OIDs that want only a single next value, the data can be viewed as a table, where we're getting rows upto "max repetitions" rows. The returned data is composed of a two-dimensional array where the first "nonRepeaters" columns have only the first data element filled in. The remaining have the rows filled in as expected. Typically, non-repeaters is 0, and we'd be returning a completely filled-in 2-D array of values.

The OID List after this request is set to the last set of OIDs in the returned bulk data, except for the initial non-repeaters for which it is set to the first and only returned OID. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT, EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN,SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_NON_REP SNMP, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

String-valued variables as a two dimensional array of String's. Returns null if no OIDs specified earlier or in case of errors. Use getErrorString() to get the reason for failure.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

snmpGetBulkVariableBindings

public SnmpVarBind[][] snmpGetBulkVariableBindings()

Get bulk on list of variables in the OID list. Available in SNMPv2c and SNMPv3 cases.

Please see RFC 1905 if you're not familiar with getbulk. Beyond the first set of non-repeater OIDS, i.e. OIDs that want only a single next value, the data can be viewed as a table, where we're getting rows upto "max repetitions" rows. The returned data is composed of a two-dimensional array where the first "nonRepeaters" columns have only the first data element filled in. The remaining have the rows filled in as expected. Typically, non-repeaters is 0, and we'd be returning a completely filled-in 2-D array of values.

The OID List after this request is set to the last set of OIDs in the returned bulk data, except for the initial non-repeaters for which it is set to the first and only returned OID. The following ErrorCodes can be set.
SNMP_NOT_INIT, INVALID_VERSION, OID_NOT_SPECIFIED, REQ_TIMEDOUT,EMPTY_VAR_BIND, IP_ADDR_NOT_SPECIFIED, SESSION_REMOTE_HOST_UNKNOWN, SECURITYEXP_CONNECTING_REMOTE_HOST, UNKNOWN_ERR, INVALID_NON_REP, INVALID_CONTEXT_NAME ,INVALID_CONTEXT_ID, SNMP error's defined in ErrorMessages.
The following ExceptionCodes can be set if the snmp version is VERSION2C/VERSION3.
ENDOFMIBVIEWEXP.

Returns:

String-valued variables as a two dimensional array of String's. Returns null if no OIDs specified earlier or in case of errors. Use getErrorString() to get the reason for failure.

See Also:

ErrorMessages, getErrorCode(), getErrorString()

isInSubTree

public static boolean isInSubTree(SnmpOID rootoid,
                                  SnmpOID objid)

Check if objid has rootoid as an ancestor. Return true if it does. This performs a straightforward comparison to see if the object-id starts with the rootoid. It is useful for walking through a column in which a walk could be terminated when the returned object id is not in the sub-tree of the column oid.

getSecurityLevel

public java.lang.String getSecurityLevel()

Gets the SNMP V3 SecurityLevel

setSecurityLevel

public void setSecurityLevel(byte sLevel)

Sets the SNMP V3 SecurityLevel.The value will be 0 ,1 or 3. For other values, warning message will be given and it will take value as 0.

Specified by:

setSecurityLevel in interface CustomizerTemplate

isSerialize

public boolean isSerialize()

Returns the status of Serialization of v3 tables ( USMUserTable and SnmpEngineTable )

Specified by:

isSerialize in interface CustomizerTemplate

vetoableChange

public void vetoableChange(java.beans.PropertyChangeEvent e)

This method is called when a vetoableChange event is fired from the propertySetting bean. Creates new users if required

Specified by:

vetoableChange in interface java.beans.VetoableChangeListener

setMaxNumRows

public void setMaxNumRows(int maxRows)

Sets the maximum number of rows that can be processed, default value is 1000.

getMaxNumRows

public int getMaxNumRows()

Gets the maximum number of rows that can be processed, default value is 1000.

setParams

public void setParams(java.lang.String host,
                      java.lang.String port,
                      java.lang.String community,
                      java.lang.String mib,
                      java.lang.String oid)

To set Multiple parameters like TargetHost,Port,Community,MibModule and OID. If any of these parameters need not be set,then it should be given as null.

Parameters:

host - target host

port - target port

community - community name

mib - mib file

oid - OID

setParams

public void setParams(java.lang.String host,
                      java.lang.String port,
                      java.lang.String community,
                      java.lang.String mib,
                      java.lang.String[] oidlist)

To set Multiple parameters like TargetHost,Port,Community,MibModule and OIDList. If any of these parameters need not be set,then it should be given as null.

Parameters:

host - target host

port - target port

community - community name

mib - mib file

oidlist - a String array of OIDs

addLogClient

public void addLogClient(LogInterface client)

Add the Log client for which the target has to redirect the log messages

setClientID

public void setClientID(int client)

The Debug can be captured by setting this clientID. This clientID will be returned by the addLogClient() method in the LogManager class. This will enable the user to capture the packet, for debugging purpose. For capturing the packets the LogInterface should be implemented.

enableDebugForPDU

public void enableDebugForPDU(boolean setonpdu)

The debug can be set on the PDU instance itself using this method. This will enable to capture packets that the user wishes from a set of packets sent/ received. To get the dumps for all the packets setDebug(boolean) can be used.

removeLogClient

public void removeLogClient()

Removes the Log client for which the target has been registered to redirect the log Messages.

getCompleteResponse

public SnmpResultObject getCompleteResponse()

Gets the complete data from the agent by splitting the varbinds into multiple requests.This can set if request pdu is very big. The number of varbinds that should be sent per request can be set using setVarBindCount() method. Also, if there is any errored varbind, it will be removed and the response for the rest of the varbind will be obtained. The errored index with the corresponding error, the successful responses and the success code (SUCCESS, PARTIAL or NOSUCCESS) can be obtained from SnmpResultObject returned.

Returns:

SnmpResultObject containing the error, successful responses and the success code.

addLogClient

public void addLogClient(LoggerProperties loggerProps)
                  throws LogException

Adds the Log client for which the target has to redirect the log messages. This method can be called when advanced method level logging mechanism needs to be used. This method is used to create a new Logger. The properties of the module are specified in the loggerProps.

Parameters:

loggerProps - - A LoggerProperties instance having the properties of the Logger such as loggingLevel.

LogException

releaseResources

public void releaseResources()

Though the resources will be cleaned up by the garbage collector, if the application is no more using the SnmpTarget bean instance, this method can be used to immediately release the resources. Close the session and api if number of targets sharing it becomes zero. Otherwise decrement the targets count for that session and api.

Overrides:

releaseResources in class SnmpServer