V5.2 Protocol Stack is no longer supported by WebNMS. However, V5.2 Protocol Stack is available as a LOW-PRICED, NO-SUPPORT version. For more details on this product and for purchase enquiries please write to sales@webnms.com
Introduction
The V5.2 Protocol defines the switching and signalling protocol between Access Network and the Local Exchange for the support of:
Analog Telephone Access
ISDN (BRI and PRI) Access
Other Digital or Analog access for Semi-permanent connections
The Protocol Software includes the following features:
Concentration Capability
Protection for Link Failures
Call Control Responsibility with LE
V5 Interface
The diagram below shows the usage of V5.2 protocol between Access Network and Local Exchange:
Architecture
The V5.2 interface is based on dynamic multiplexing and concentrator type principle. It defines the lower three layers of the OSI stack that is to be used in connecting access networks to exchanges. A simplified version of the V5.2 protocol stack is shown below.
Key Features of WebNMS V5.2 Protocol Stack:
Fully compliant with ETS 300-324/347 V5.x series standards
Both AN and LE side V5.2 is available
Hooks for Q3 interface support for AN and LE side V5.2 management is available.
The protocol stack is tested for conformance with the ETSI specifications using the Siemens K1297 protocol tester.
