It will wait for the response from the specified proxy agent

It will be searching in que for the response from the subagent by comparing request id.

It will wait for the response from the specified proxy agent, once data is available, it will will retun the function to read the message.

This method will wait till all threads become wating state.

This method will wait for the response for the specified IpInfo.

This method will wait for the response for the specified TransportDomainInfo.

This function will be called when who command is received with invalid options.User can cutomize the usage string to his requirements.

Write method for (table) column access.

Write method for (table) column aclManagers. "This variable has the managers list allowed for specified access with specified community. The format of the string is 'managerName1;managerName2.....' with a list of manager IpAddress/name corresponding to each additional information separated via ';' as the delimiter between any two managers. The default value is '0:0:0:0' which states access for all managers for the corresponding community."

Write method for (table) column aclStatus.

Set method for (table) column agentCommunity.

Set method for (table) column agentHost.

Set method for (table) column agentHostType.

Set method for (table) column agentPortNumber.

Set method for (table) column agentStatus.

Write method for (table) column community.

Write method for (table) column contextName.

Write method for (table) column managerStatus.

Write method for (table) column ManagerVersion.

It writes message into craft interface.

It writes message into serial interface.

Set method for (table) column proxyCommunity.

Set method for (table) column proxyHost.

Set method for (table) column proxyHostType.

Set method for (table) column proxyPortNumber.

Set method for (table) column proxyRetries.

Set method for (table) column proxySnmpVersion.

Set method for (table) column proxyStatus.

Set method for (table) column proxyTimeOut.

Write method for (table) column retries.

Sends response message to client.

Write method for (table) column secLevel.

Write method for (table) column secModel.

Set method for scalar variable snmpIpAddress. IP address used by the SNMP agent to receive and send requests and responses.

Set method for scalar variable snmpOperStatus. The run status of the SNMP adapter.

Set method for scalar variable snmpPortNumer. Port number used by the SNMP agent to listen manager requests.

Set method for (table) column snmpGrpCntrsEnableAuthenTraps.

Set method for scalar variable snmpSnmpSetSerialNo. An advisory lock used to allow several cooperating SNMPv2 entities, all acting in a manager role, to coordinate their use of the SNMPv2 set operation. This object is used for coarse-grain coordination. To achieve fine-grain coordination, one or more similar objects might be defined within each MIB group, as appropriate.

Set method for scalar variable sysContact. The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Set method for scalar variable sysLocation. The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.

Set method for scalar variable sysName. An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Set method for scalar variable snmpUpTime. SNMP agent (Adapter) up time.

Set method for (table) column usmUserAuthKeyChange.

Set method for (table) column usmUserAuthProtocol.

Set method for (table) column usmUserCloneFrom.

Set method for (table) column usmUserOwnAuthKeyChange.

Set method for (table) column usmUserOwnPrivKeyChange.

Set method for (table) column usmUserPrivKeyChange.

Set method for (table) column usmUserPrivProtocol.

Set method for (table) column usmUserPublic.

Set method for (table) column usmUserStatus.

Set method for (table) column usmUserStorageType.

Set method for (table) column snmpVacmAccessContextMatch. If the value of this object is exact(1), then all rows where the contextName exactly matches snmpVacmAccessContextPrefix are selected. If the value of this object is prefix(2), then all rows where the contextName whose starting octets exactly match snmpVacmAccessContextPrefix are selected. This allows for a simple form of wildcarding.

Set method for (table) column snmpVacmAccessNotifyViewName. The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes access for notifications. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.

Set method for (table) column snmpVacmAccessReadViewName. The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes read access. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.

Set method for (table) column snmpVacmAccessStatus. The status of this conceptual row. The RowStatus TC [RFC 2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this conceptual row can be modified.

Set method for (table) column snmpVacmAccessStorageType. The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.

Set method for (table) column snmpVacmAccessWriteViewName. The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes write access. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.

Set method for (table) column snmpVacmSecurityToGroupStatus.

Set method for (table) column snmpVacmSecurityToGroupStorageType.

Set method for (table) column snmpVacmViewTreeFamilyMask.

Set method for (table) column snmpVacmViewTreeFamilyStatus.

Set method for (table) column snmpVacmViewTreeFamilyStorageType.

Set method for (table) column snmpVacmViewTreeFamilyType.

Set method for scalar variable snmpVersion. Supported SNMP version. The possible values are SNMPv1, SNMPv2c and SNMPv3.

It will write the string to the file and copies it to the destination string.

Sends response message to client.

Write method for (table) column timeOut.

It will write the table enteries from the Vector into the file.

It will write the gateway NE entries from the table(vector) into file. After Successfully writing into the file it returns SUCCESS else FAILURE.

It will write the table enteries from the Vector into the file.

It will write the table enteries from the Vector into the file.

It will write the security log records from the table(vector) into file. After Successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "notificationLogTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "notificationVarBindTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the scalar object values into the file. After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the scalar object values into the file. into the file.

It will write the table enteries from the Vector into the file.

It will write the table enteries from the Vector into the file.

It will write the table enteries from the vector into the file.

It will write the table enteries from the Vector into the file.

It will write the table enteries from the Vector into the file.

Writes Security Details To File.

It will write the table enteries from the Vector into the file.

It will write the "wwwDocAccessTopNTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "wwwDocBucketTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "wwwDocBytesTopNTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "wwwDocCtrlTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "wwwDocLastNTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "wwwRequestInTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "wwwRequestOutTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "wwwResponseInTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "wwwResponseOutTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "wwwServiceTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

It will write the "wwwSummaryTable" enteries from the table(vector). After successfully writing into the file it returns SUCCESS else FAILURE.

Write method for (table) column userName.

Set method for (table) column usmUserSpinLock.

Set method for (table) column vacmGroupName.

Set method for (table) column vacmViewSpinLock.

initialising alarm parameters

write log details to file. (general method)

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.