It checks whether data available on craft interface to read or not.

It checks whether data available on serial interface to read or not.

It checks whether data available on UDP server socket to read or not.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This function internally will call SendNotification() method of notificationsupport.c to brodcast the give notification to all the registered listeners. After the notification is received the respective listener will do any sort of work. For example the adapters (SNMP, HTTP, TL1) will try register as a listener with the "source" of the given notification to receive notification from that source too. In the case of Monitoring and Timer, the corresponding action will be taken after receiving notification.

This function will first creates a tdInfo with the remote host and remote port values and then open an Snmp session. Then it sends the pdu to the corresponding host and port and finally gets back the response in the form of rcvdPdu. Also, the rcvdPdu informations are displayed.

This function will send the message from taken sendQueue and receive the response from the subagent and add it to the rcvdQueue.

It dequeues message from Tx Q and send it to the client.

It will broadcast the given Notification to all the registered listeners of the given table.

It will broadcast the given Notification to all the registered listeners of the given table.

It will call MakeAndSendMasterAgentsTrap() method continuosly in a seperate thread.

This function will send the message taken from sendQueue

It will take each listener from the given notification listener table and call the following methods in the sequence IsNotificationEnabled() and HandleNotification(). If IsNotificationEnabled() returns no then it won't call the handle method. Suppose if any object or module wants so send notification then this method will be called.

It is used to send timer notifications for old(past) timer registrations when timer service is started. If gv_sendPastNotificationFlag is SET then it will send notifications to all listeners for old timer notifications and update the timer notifications. If the flag is UNSET then it will update the old timer notifications and don't send notifications to listeners.

This function will send the created pdu to the master agent and waits for the response and returns SUCCESS or FAILURE depends on the response received from the master agent.

It will send SNMP message to the remote application, the remote may be manager or subagent.

It will send SNMP message to the remote application, the remote may be manager or subagent.

It will first create the Snmp message for the specified pdu and the transport domain values and finally send the Snmp message to the manager.

It will send SNMP trap message to manager.

It will broadcast the given Notification to all the registered listeners of the given table.

Send a Tcp message to the client.

It will broadcast the given Notification to all the registered listeners of the gv_timerServiceNotifListenerTable.

Creates a trap SNMP message with given entries and add it to the trap list.

Creates a trap SNMP message with given entries and add it to the trap list.

It will send either TRAP or INFORM to the given manager.

Creates a trap SNMP message for all valid targets filtered by notification mib.

It writes UDP message into client socket.

It will send a data/pkt thru the specified socket.

This method call each listener's update method to notify that all SET in the received request are ok, so the listener can update its data structure with new value. Iw will be invoked for SET and GET request.

This method will be called from the agent api for all the requests (GET/GET-NEXT/SET) with received pduType and varBind vector before processing the received varbinds. The purpose of this method call is, the user can know the set of varBinds (OIDs') received for a listener. Using these inputs user may do some validation or call his application method and update the local data structure. User has to specify the error status and error index.

This function will be called when session command is received with invalid options.User can cutomize the usage string to his requirements.

This method will be called by CLI Engine upon receiving the CLI command.Here, user can write his code to perform the necessary action upon receiving the CLI command.

This method will be called by CLI Engine upon receiving the CLI command.Here, user can write his code to perform the necessary action upon receiving the CLI command.

set logging status to ALLOW.

It will modify the specified attribute value with given value. The status of the operation will be returned in "status" variable.

This function creates the Attribute array with the param name and the value and also fills the type of each attribute in the attrTypes array using the module Information.

It will set keep alive time out for given session.

Set the Display table string for the given node.

Set method for (table) column cap. command access previlages

set cannel status.

Set method for (table) column cliCommIfcIndex. CLI communication interface index, it is just a numeric value which will be assigned during row creation.

Set method for (table) column cliCommIfcInfo. Detailed information about the supported CLI transport protocol.

Set method for (table) column cliCommIfcType. The supported CLI communication interface type between NE and OSS.

set command state.

Set method for (table) column cmdrowStatus. Column Description

Set method for (table) column cmdstatus. in/out of service

Set method for (table) column command. command code

It will Set the command attribute value.

This method is used to set the debug level macro in a global variable.

Assigns default dural value.

Assigns default Mxinv value.

Set default PAGE value to be assigned.

Assigns default PAGE value.

Set default PCND value to be assigned.

Assigns default pcnd value.

Set default PCNN value to be assigned.

Assigns default pcnn value.

Assigns default Tmout value.

Set default UOUT value to be assigned.

Assigns default uout value.

Set method for scalar variable err304responses. Description

Set method for scalar variable err400responses. Description

Set method for scalar variable err401responses. Description

Set method for scalar variable err404responses. Description

Set method for scalar variable err404responses. Description

Set method for scalar variable err408responses. Description

Set method for scalar variable err412responses. Description

Set method for scalar variable err501responses. Description

Set method for scalar variable err505responses. Description

Set method for scalar variable errorresponses. Description

Set method for (table) column fapList. field acces previlage list

Set method for scalar variable getrequests. Description

Set method for scalar variable headrequests. Description

This function creates the html tags for displaying a table If the input flag argument is true then the table tag is opened and closed if it is false.

Sets the socket list with all socket descriptors (Server socket descriptor, and each client's descriptor).

Set method for (table) column ipaddress. Column Description

Set method for (table) column lastreqtime. Column Description

It will set maximum client session count.

Get each oid from the srcOid and set it to destOid starting from startIndex upto startIndex+len.

Stop logging data.

Set method for (table) column numrequests. Column Description

Set method for (table) column numresponses. Column Description

Set method for (table) column operationRowStatus. Column Description

Set method for (table) column operationStatus. in/out of service

Set method for (table) column operationaid. resource name

Set method for (table) column portno. Column Description

Set method for scalar variable postrequests. Description

Set method for scalar variable processedrequests. Description

It will update the transport domain info properties. Now it is UDP/IP, so it will update socket poperties like remote IP address, port number, etc.

Set method for (table) column rciList. list of channels/users allowed

set status of resource.

Set method for scalar variable sentresponses. Description

Set method for (table) column sessionid. Column Description

Set method for (table) column sessionstate. Column Description

It will update the System group mib objects value by making respective OS system calls.

Set each sockFd into readFdSet variable.

Reset System dat and time.

Set method for (table) column tcpConnIpAddress. IP address used for this connection.

Set method for (table) column tcpConnPortNumber. Port number used for this connection.

Set method for (table) column tcpConnStatus. The state of this TCP/IP connection. The state will be either Operational or Blocked.

Set method for scalar variable tl1OperStatus. HTTP Server status, if it is one (1) it means HTTP server (adapter) is running. If it is zero (0) it means HTTP server (adapter) is not running.

Set method for scalar variable tl1UpTime. TL1 agent(adapter) uptimer.

Set method for scalar variable tl1Version. TL1 adapter version.

It will update the transport domain info properties. Now it is UDP/IP, so it will update socket poperties like remote IP address, port number, etc.

It will send the data(PDU) thru the specified socket.

This function will be called when set command is received with invalid options.User can cutomize the usage string to his requirements.

Set method for (table) column view. view name

Set method for (table) column wwwDocAccessTopNAccesses. The total number of access attempts for this document.

Set method for (table) column wwwDocAccessTopNBytes. The total number of content bytes that were transmitted as a result of attempts to access this document.

Set method for (table) column wwwDocAccessTopNIndex. An arbitrary monotonically increasing integer number used for indexing the wwwDocAccessTopNTable. The index is inversely correlated to the sorting order of the table. The document with the highest access count will get the index value 1.

Set method for (table) column wwwDocAccessTopNLastResponseType. The protocol response type which was sent to the client as a result of the last attempt to access this document. This object contains the type of the primary response if there were multiple responses to a single request.

Set method for (table) column wwwDocAccessTopNName. The name of the document for which access was attempted.

Set method for (table) column wwwDocBucketAccesses. The total number of access attempts for any document provided by this WWW service during the time interval over which this bucket was created.

Set method for (table) column wwwDocBucketBytes. The total number of content bytes which were transferred from this WWW service during the time interval over which this bucket was created.

Set method for (table) column wwwDocBucketDocuments. The total number of different documents for which access was attempted this this WWW service during the time interval over which this bucket was created.

Set method for (table) column wwwDocBucketIndex. An arbitrary monotonically increasing integer number used for indexing the wwwDocBucketTable. The index number wraps to 1 whenever the maximum value is reached.

Set method for (table) column wwwDocBucketTimeStamp. The date and time when the bucket was made available.

Set method for (table) column wwwDocBytesTopNAccesses. The total number of access attempts for this document.

Set method for (table) column wwwDocBytesTopNBytes. The total number of content bytes that were transmitted as a result of attempts to access this document.

Set method for (table) column wwwDocBytesTopNIndex. An arbitrary monotonically increasing integer number used for indexing the wwwDocBytesTopNTable. The index is inversely correlated to the sorting order of the table. The document with the highest byte count will get the index value 1.

Set method for (table) column wwwDocBytesTopNLastResponseType. The protocol response type which was sent to the client as a result of the last attempt to access this document. This object contains the type of the primary response if there were multiple responses to a single request.

Set method for (table) column wwwDocBytesTopNName. The name of the document for which access was attempted.

Set method for (table) column wwwDocCtrlBucketTimeInterval. The time interval after which a new bucket is created. Changing this object has no effect on existing buckets.

Set method for (table) column wwwDocCtrlBuckets. The maximum number of buckets maintained by the agent before the oldest bucket is deleted. The buckets are used to populate the wwwDocAccessTopNTable and the wwwDocBytesTopNTable. The time interval captured in each bucket can be configured by setting the wwwDocCtrlBucketTimeInterval object.

Set method for (table) column wwwDocCtrlLastNLock. This object allows a manager to lock the wwwDocLastNTable in order to retrieve the wwwDocLastNTable in a consistent state. The agent is expected to take a snapshot of the wwwDocLastNTable when it is locked and to continue updating the real wwwDocLastNTable table so that recent information is available as soon as the wwwDocLastNTable is unlocked again. Setting this object to a value greater than 0 will lock the table. The timer ticks backwards until it reaches 0. The table unlocks automatically once the timer reaches 0 and the timer stops ticking. A manager can increase the timer to request more time to read the table. However, any attempt to decrease the timer will fail with an inconsistentValue error. This rule ensures that multiple managers can simultaneously lock and retrieve the wwwDocLastNTable. Note that managers must cooperate in using wwwDocCtrlLastNLock. In particular, a manager MUST not keep the wwwDocLastNTable locked when it is not necessary to finish a retrieval operation.

Set method for (table) column wwwDocCtrlLastNSize. The maximum number of entries in the wwwDocLastNTable.

Set method for (table) column wwwDocCtrlTopNSize. The maximum number of entries shown in the wwwDocAccessTopNTable and the wwwDocBytesTopNTable. Changing this object has no effect on existing buckets.

Set method for (table) column wwwDocLastNBytes. The number of content bytes that were returned as a result of this attempt to access a document.

Set method for (table) column wwwDocLastNIndex. An arbitrary monotonically increasing integer number used for indexing the wwwDocLastNTable. The first document accessed appears in the table with this index value equal to one. Each subsequent document is indexed with the next sequential index value. The Nth document accessed will be indexed by N. This table presents a sliding window of the last wwwDocCtrlLastNSize documents accessed. Thus, entries in this table will be indexed by N-wwwDocCtrlLastNSize thru N if N > wwwDocCtrlLastNSize and 1 thru N if N <= wwwDocCtrlLastNSize. The wwwDocCtrlLastNLock attribute can be used to lock this table to allow the manager to read its contents.

Set method for (table) column wwwDocLastNName. The name of the document for which access was attempted.

Set method for (table) column wwwDocLastNRequestType. The protocol request type which was received by the server when this document access was attempted.

Set method for (table) column wwwDocLastNResponseType. The protocol response type which was sent to the client as a result of this attempt to access a document. This object contains the type of the primary response if there were multiple responses to a single request.

Set method for (table) column wwwDocLastNStatusMsg. This object contains a human readable description of the reason why the wwwDocLastNResponseType was returned to the client. This object defines the implementation-specific reason if the value of wwwDocLastNResponseType indicates an error. For example, this object can indicate that the requested document could not be transferred due to a timeout condition or the document could not be transferred because a 'soft link' pointing to the document could not be resolved.

Set method for (table) column wwwDocLastNTimeStamp. The date and time of the last attempt to access this document.

Set method for (table) column wwwRequestInBytes. The number of content bytes per request type received by this WWW service.

Set method for (table) column wwwRequestInIndex. The particular request type the statistics apply to.

Set method for (table) column wwwRequestInLastTime. The date and time when the last byte of the last complete request of this type was received by this WWW service. The value SHALL be '0000000000000000'H if no request of this type has been received yet.

Set method for (table) column wwwRequestInRequests. The number of requests of this type received by this WWW service.

Set method for (table) column wwwRequestOutBytes. The number of content bytes per requests type generated by this WWW service.

Set method for (table) column wwwRequestOutIndex. The particular request type the statistics apply to.

Set method for (table) column wwwRequestOutLastTime. The date and time when the first byte of the last request of this type was send by this WWW service. The value SHALL be '0000000000000000'H if no request of this type has been send yet.

Set method for (table) column wwwRequestOutRequests. The number of requests of this type generated by this WWW service.

Set method for (table) column wwwResponseInBytes. The number of content bytes per response type received by this WWW service.

Set method for (table) column wwwResponseInIndex. The particular response type the statistics apply to.

Set method for (table) column wwwResponseInLastTime. The date and time when the last byte of the last complete response of this type was received by this WWW service. The value SHALL be '0000000000000000'H if no response of this type has been received yet.

Set method for (table) column wwwResponseInResponses. The number of responses of this type received by this WWW service.

Set method for (table) column wwwResponseOutBytes. The number of content bytes per response type generated by this WWW service.

Set method for (table) column wwwResponseOutIndex. The particular response type the statistics apply to.

Set method for (table) column wwwResponseOutLastTime. The date and time when the first byte of the last response of this type was sent by this WWW service. The value SHALL be '0000000000000000'H if response of this type has been send yet.

Set method for (table) column wwwResponseOutResponses. The number of responses of this type generated by this WWW service.

Set method for (table) column wwwServiceContact. The textual identification of the contact person for this service, together with information on how to contact this person. For instance, this might be a string containing an email address, e.g. ''.

Set method for (table) column wwwServiceDescription. Textual description of the WWW service. This shall include at least the vendor and version number of the application realizing the WWW service. In a minimal case, this might be the Product Token (see RFC 2068) for the application.

Set method for (table) column wwwServiceIndex. An integer used to uniquely identify a WWW service. The value must be the same as the corresponding value of the applSrvIndex defined in the Application Management MIB (APPLICATION-MIB) if the applSrvIndex object is available. It might be necessary to manually configure sub-agents in order to meet this requirement.

Set method for (table) column wwwServiceLastChange. The date and time when this WWW service entered its current operational state. The value SHALL be '0000000000000000'H if the time of the last state change is not known.

Set method for (table) column wwwServiceName. The fully qualified domain name by which this service is known. This object must contain the virtual host name if the service is realized for a virtual host.

Set method for (table) column wwwServiceOperStatus. Indicates the operational status of the WWW service.

Set method for (table) column wwwServiceProtocol. An identification of the primary protocol in use by this service. For Internet applications, the IANA maintains a registry of the OIDs which correspond to well-known application protocols. If the application protocol is not listed in the registry, an OID value of the form {applTCPProtoID port} or {applUDPProtoID port} are used for TCP-based and UDP-based protocols, respectively. In either case 'port' corresponds to the primary port number being used by the protocol.

Set method for (table) column wwwServiceStartTime. The date and time when this WWW service was last started. The value SHALL be '0000000000000000'H if the last start time of this WWW service is not known.

Set method for (table) column wwwServiceType. The application type using or realizing this WWW service.

Set method for (table) column wwwSummaryInBytes. The number of content bytes received.

Set method for (table) column wwwSummaryInLowBytes. The lowest thirty-two bits of wwwSummaryInBytes.

Set method for (table) column wwwSummaryInRequests. The number of requests successfully received.

Set method for (table) column wwwSummaryInResponses. The number of responses successfully received.

Set method for (table) column wwwSummaryOutBytes. The number of content bytes transmitted.

Set method for (table) column wwwSummaryOutLowBytes. The lowest thirty-two bits of wwwSummaryOutBytes.

Set method for (table) column wwwSummaryOutRequests. The number of requests generated.

Set method for (table) column wwwSummaryOutResponses. The number of responses generated.

Initialize serial port.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

This method is called from agent api (pdureqhdlr.c) when a get/get-next request is made from the manager. This method will identify the exact scalar/table column for which the request is made and call the corresponding get method which is available in the instrument file. output from this function will be the value of the requested variable, length of the variable, the error status if any.

This method is called from agent api (pdureqhdlr.c) when a get/get-next request is made from the manager. This method will identify the exact scalar/table column for which the request is made and call the corresponding get method which is available in the instrument file. output from this function will be the value of the requested variable, length of the variable, the error status if any.

It will be called for period of time. This method will call the methods to destroy the entry from gv_rcvdSubagentPduVect and gv_tdInfoAndStsVect.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

It will process the GET & GET-NEXT requests and send back the appropriate result.

It will process the SET requests and send back the modified result.

This function sorts the Optimal Search Array.

It will split the given instance value into number of index and store then in "indexes" variable, the corresponding length of each index will be inindexesLen variable.

It will split the given string into two strings (param name & value), by using '=' as divider. If the character '=' is found then split the string and return SUCCESS otherwise, i.e if it is not possible to split then return FAILURE.

Check if any message is waiting to be read.

Starts CLI service.

It will start the Counter Monitor Service.

It will start the Gauge Monitor Service.

This function opens the server socket and starts the Http Adapter.

It will start the monitoring service.

It will start a thread which is used to process HTTP requests. It has one loop, and will be in blocking state. If any request is received by the HTTP then it will add it to the HTTP queue. This thread will be notified based on CheckThreadPool() result. Once this thread is notificed it will come out from the blocking state and will read the the HTTP request from the queue, process it and will send a response to the manager. Again will be in the waiting state for the next request to process.

It will start a thread which is used to process SNMP requests. It has one loop, and will be in blocking state. If any request is received by the SNMP then it will add it to the SNMP queue. This thread will be notified based on CheckThreadPool() result. Once this thread is notificed it will come out from the blocking state and will read the the SNMP request from the queue, process it and will send a response to the manager. Again will be in the waiting state for the next request to process.

This method will set the flag true which will start receiving the request by the snmp service.

It will initialize and start the adapters of the agent to receive and process their requests.

It will do all necessary initialization required for the SSH socket communication.

This method will start the snmp service at the specified port.ie it will open a new snmp session for the new port.

It will continiously poll the subagent and send subagent linkup trap and subagent link down trap appropriately.

It will start the String Monitor Service.

It will do all necessary initialization required for the TCP/IP socket communication.

It will do all necessary initialization required for the Telnet socket communication.

It will start the Timre Service.

Check each sub identifier of the oid1 and oid2 if all are same upto the given length then YES will be returned, this means oid1 contains oid2. Othewise NO will be returned.

Check each character of the str1 and str2 if all are same upto the given length then YES will be returned, this means String2 starts with String1. Othewise NO will be returned.

It will stop the Counter Monitor Service.

It will stop the Gauge Monitor Service.

It will stop the monitoring service.

This method will set the flag false which will stop receiving the request by the snmp service.

This method will stop the snmp service.ie it will close the snmp session.

It will stop the String Monitor Service.

It will stop the Timer Service.

This will store all the registered OID's in an array.

Get each byte from the source string and cancatenate to destination string.

Compares each corresponding bytes of these two strings case insensitive and return the result.

The strchr() function returns a pointer to the first occurrence of char in string s.

Compares each corresponding bytes of these two strings and return the result.

Get each byte from the source string and copy to destination string until null character is encountered.

This function parses the string coming as the second argument and decodes the given string. If the first character is a '%' then the next two characters are converted to the decimal values.

Get each byte one by one from the location pointed by the strPtr, until strPtr reaches '\0'. For each byte increase a counter.

This function will compare two strings with case insensitive for the first N character and return the result in integer value

This function will compare the two strings for first n characters.

Get each byte from the source string and copy to destination string until counter reaches len or encounter a null character.

This function will reverse the given string and put it into the same variable.

The strspn() function returns the length of the initial segment of string s1 that consists entirely of characters from string s2.

This String Tokenizer searches for the delimiter in the array of characters and split into a group.

This function will reverse the given string and put it into the same variable.

Finds out whether the second argument string is a substring of first argument String, if it is then it returns the reference of the first string.

It will search the given resource in the gv_rsrcLockTable, if it is present means it is locked by other thread/user so can't be locked. If the rsrc is not present in the table then it will add the Entry and lock the given resource. The given source variable will be stored in the table to verify during unlock period.

It will synchronize/lock the given resource, so that not more than one thread/user can use the same resource. When it lock the resource it will store the owner who is locking the resource.